TechT Paintball

Cyclone Feed Lightening Rod

Replace rod made of aluminum to allow your cyclone feed to operate at maximum speed.
Item: TP002  In Stock
  Manufacturer: TechT
(2 reviews) Write A Review
Share:
MSRP: $29.99 Your Price: $24.99
Item Comments:
Qty to Add:


The Lightening Rod is designed to work with the stock parts or in conjunction with our Vortex Mod and Quick Exhaust Piston Housing. Together, the parts will yield higher rates of fire and increased air efficiency from your cyclone feed loader. Users have reported feed rates as high as 30-35 balls per second when using the the Lightening Rod in conjunction with the other TechT Cyclone Feed Upgrades.

The secret to the performance gains is the rigidity of the rod, along with the honed brass bushing and polished pin that connect the piston rod and ratchet of the Cylone Feed. The precision fit of the bushing and pin creates much less friction and resistance than the stock parts, and that allows for a smoother and faster action that greatly increases the speed and reliability of the Cyclone.

The TechT Lightening Rod is made from the super strong 7071 grade billet aluminum. This strong aluminum will not bend or break like the plastic, giving it a much longer wear life. It also allows all of the power needed to drive the Cyclone Feedto be directed straight through the Lightening Rod to the ratchet system and not be lost in the bending action like the stock.


Our Testing has shown:

1. With the Vortex Mod and Lightening Rod, your Cyclone will continue to feed at lower pressures. This means little to no manual feeding when you get low on air.

2. Due to the use of teflon and our modified ratchet and axle design your loader will have less internal friction with each cycle, yielding higher rates of fire and less wear and tear.

Brass Brushing

7071 Aluminum Design - The strongest available design
Reduces Friction 
Increases Air Efficiency
Higher Rates of Fire
Made in the USA
  • Manufacturer: TechT
  • Shipping Weight: 0.1 lbs
Average Rating   5 stars (based on 2 reviews)
You must be logged in to write a review
Recent Reviews Rating: Reviewed By: Logan T. Review Date: 4/4/2016 Comments: Easy 5 star. Very light, very strong. Very well built. Probably the last piston I will have to buy.
Rating: Reviewed By: Dan D. Review Date: 1/14/2011 Comments: Light and strong, unlike the flimsy stock piece. Was a perfect fit in both the stock piston housing as well as the q.e.p.h. which was nice because I have had problems with other makers products not fitting properly. Read All Reviews
techt, ifit, TECHT, Tech-t