|
|
|
PMR
L7 Bolt System
Finally....its
here. The L7 Bolt for the PMR. I know many of you have
been waiting patiently for it, and at last the wait
is over. For those of you unfamiliar with what the L7
Bolt System, it's a bolt system that is designed to
be the lightest possible. The L7 is specifically designed
to decrease marker "kick" and increase accuracy.
All of our bolts run faster and smoother than any other
bolt system available. Those that have tested this bolt
have said that the kick reduction from this bolt is
amazing. At any given pressure and dwell this bolt yields
about an extra 10-15 FPS over the stock bolt.
This
is our latest PMR Bolt System. As you can see in the
picture to the right, the bolt now comes with spacers
to change the operating pressure of the marker. With
no spacers the bolt system will shoot 300 FPS around
140-150 PSI. With one spacer as shown here, the bolt
will shoot 300 FPS at 150-160 PSI. With two spacer the
marker will shoot 300 FPS at 190-200 PSI.
The
spacers make the operation of the marker more adjustable
to your preference.
|
PMR
L7 Installation Instructions
|
 |
The
Proto Rail is a pretty awesome marker. However the stock
bolt system has a large amount of kick when set up to
shoot 300 FPS. I personally feel that the stock set-up
feels a bit "chunky". This kick, or "chunkiness",
knocks you out of aim, and ultimately makes you shoot
more to hit your target. This causes you to win less,
and get shot more.
The
L7 is designed to change that. Our patent pending
"reduced kick/high speed internal system"
allows you to stay on target better, shoot faster, and
hit the target more quickly than ever before.
You
will be amazed at how much better your marker feels
and shoots. |
|
|
To
call in your order. Please call 901-405-1848
Phone Support Available Monday - Friday 10am-5pm
Central |
 |
|
Be
Proactive!!!
Get
some Extra Orings!!!
As with
anything paintball, the L7 takes orings. Some common, some
not so common. If you can get them when you purchase your
bolt, they'll ship for free. This
could save you a headache in the future.
Entire
PMR Rebuild Kit
Includes
every oring you need to rebuild the L7 PMR Bolt.
$8.99
|
 |
6
Pack - Inner Top Hat O-rings
PMR Inner
Top Hat O-rings are special orings that you will not find
anywhere else other than here. If there is one o-ring you
should keep on hand, its this one.
$5.99
|
Gun
Sav - High Performance Grease
It is
super, super slick, and long lasting. We recommend it not
because we make it, but because its the slickest and smoothest
grease we have EVER seen.
I tested
every grease available before I decided to make this grease.
Other greases just don't cling to the parts like this stuff.
For months
now we have offered this grease to our most trusted dealers.
Everyone of them has agreed that this is better than ANY grease
they have ever used. If this wasn't the case, I would not
have offered the grease for sale to the public. I don't want
to just make another product, I want to only make the best
products.
That's
just how I roll.
Try some
....you'll love it. Its perfect for lubing up your PMR Bolt.
TechT
Gun Sav - 1oz Tub
$9.99
|
|
OFFICIAL
BETA UPDATE
For those people who purchased the BETA Version of the PMR
L7 Bolt, there is now an update available for you. This update
requires that you send your bolt system to us for the updates.
The updates will increase efficiency and consistency.
The Beta Version of the PMR Bolt also has a different back
section. If you would like your back section updated to the
new adjustable back section just specify that with your return.The
older rear section allows the bolt to run at a lower pressure
than the new one, but it is not adjustable with the new sleeves.
If you prefer lower pressure operation, I would stay with
the old style. If you like higher / adjustable pressure operation
I would get the new one.
Please click here to go to the
returns page. Please print off the form and send it in with
your part. You do not need an RMA for this update. Just please
be sure to specify if you want the updated rear bolt section.
Thanks,
Todd |
Beta
PMR Bolt
If you bolt looks like the one shown here you have the beta
version and you are eligible for the update
Please contact todd@techtpaintball.com if you are interested
in the update.. |
 |
|
|
