TechT Paintball Products

The Vortex Mod was the first hard-coated and teflon coated aluminum internals that replace the stock plastic internals of the Tippmann Cyclone Feed to be released in the paintball industry.

The popularity of electronic controls in Tippmann A5, X7, and 98's that allow for rates of fire of up to 30 BPS, has warranted the need for higher performing internals for the cyclone feed that will allow the loader to keep up with the marker.

Our testing has shown that the Vortex Mod will allow the Cyclone feed to work at lower pressures, feed faster, and last up to 1000 times longer than the stock plastic cyclone feed internals.

While stock cyclone internals need to be replaced on a regular basis, the Vortex Mod is a permanent solution that makes the cyclone into the fastest, and most reliable loader available.

Vortex Installation Instructions

This web site will accept Paypal and Standard Credit Card Payments
Or call in your order to 901-409-1848

Since its release, the Vortex Mod has been the most widely used, and most trusted name in cyclone upgrades. The Vortex Mod is specifically designed to be the fastest, smoothest actuating, and most durable/long lasting upgrade available.

The "Genuine" Vortex Mod is by far the most durable and highest performing cyclone upgrade available. If it wasn't, we would redesign it to crush the competition...again...that's just how we roll.

The Vortex Mod will feed upwards to 30+ balls per second and continue to load down to pressures as low as 150psi.

Stock parts only feed up to 15 balls per second and only down to a pressure of 400 psi

Click to see the New Vortex Mod Sticker

Here are some demo videos our customers have made....GUNS BLAZING!!!!

Our Testing has shown:

1. With the Vortex Mod, your cyclone will continue to feed at lower pressures. This means little to no manual feeding when you get low on air.

2. Due to the use of teflon and our modified ratchet and axle design your loader will have less internal friction with each cycle. This means higher potential rates of fire, and less wear and tear.

Installation Instructions

Buy The Part

Complete Cyclone Upgrade Package

Vortex Cutout

This shopping cart accepts Standard Credit Card Payments and Paypal Payments. To order by phone call 901-409-1848

Cyclone Upgrades
Vortex Mod, Lightening Rod, QEPH, Squishy Paddles
Only $109.99

	Cyclone Feed Complete Kit W/ Black QEPH
	Cyclone Feed Complete Kit W/ Silver QEPH

Related Products

Spare Parts

Spare Vortex Mod Ratchet and Pins

Vortex Ratchet
$20.00

Spare Vortex Mod Axle and Top Screw

$15.00

Gun Sav

You will also need some lube for the Vortex Mod, we suggest...

Gun Sav - High Performance Grease

THIS GREASE IS PERFECT FOR LUBING YOUR
VORTEX MOD AND QEPH AND Tippmann Internals

It is super, super slick, and long lasting. We recommend it not because we make it, but because its the slickest and smoothest grease we have EVER seen.

I tested every grease available before I decided to make this grease. Other greases just don't cling to the parts like this stuff.

For months now we have offered this grease to our most trusted dealers. Everyone of them has agreed that this is better than ANY grease they have ever used. If this wasn't the case, I would not have offered the grease for sale to the public. I don't want to just make another product, I want to only make the best products.

That's just how I roll.

Try some....you'll love it. Its perfect for lubing up your Tippmann.

TechT Gun Sav - 1oz Tub

$9.99