|
|
|
|
|
|
|
|
|
The TECHT MRT (MASS REDUCTION TECHNOLOGY) Pro Series TPX Bolt has been engineered with efficiency and consistency as the most crucial design elements. We have also added a soft touch face to our TPX Bolt, (the same used on our Phenom MRT Pro Series Bolt) which will significantly decrease ball breakage. Our MRT system minimizes excess weight by removing portions of the bolt which are not utilized. Our spiral cut pattern allow us to lengthen the channels of material to be removed, this results produce a very dynamic looking bolt. Players that upgrade to the MRT Pro Series TPX Bolt will see significant increases in efficiency and the elimination of ball breakage typically associated with the stock TPX bolt. This version of the TECHT MRT Pro Series Bolt is made of a of 100% aircraft grade aluminum, which results in a super light design that is very strong. This design pushes the limits of weight reduction while maintaining very good strength.
Note this bolt is intended to work with the stock barrel. The MRT Bolt may not fit in aftermarket barrels or insert sizes, and fit issues could cause the bolt to break. This type of issue is not covered under warranty. If you want to shoot over 300 FPS or use a different barrel than stock be sure to hand size the bolt to the barrel before you try to shoot it. The bolt needs to slide in and out if the tip of the barrel 1/2 inch and not get stuck.
- Aircraft Grade Aluminum Construction
-
Soft Anti-Chop Tip O-ring
-
Increases Efficiency
-
Decrease Marker Pressure
-
Manufacturer:
TechT
-
Shipping Weight:
0.14
lbs
Be the first person to review this product
You must be logged in to write a review
|
|
|
|
|
|
|
|
|
|
|