|
|
|
|
|
|
|
|
|
The TECHT MRT (MASS REDUCTION TECHNOLOGY) Pro Series TPX Bolt has been engineered with efficiency and consistency as the most crucial design elements. We have also added a soft touch face to our TPX Bolt, (the same used on our Phenom MRT Pro Series Bolt) which will significantly decrease ball breakage. Our MRT system minimizes excess weight by removing portions of the bolt which are not utilized. Our spiral cut pattern allow us to lengthen the channels of material to be removed, this results produce a very dynamic looking bolt. Players that upgrade to the MRT Pro Series TPX Bolt will see significant increases in efficiency and the elimination of ball breakage typically associated with the stock TPX bolt. The TECHT MRT Pro Series Bolt is made of a combination of aircraft grade aluminum and delrin, which results in a super light design. This design pushes the limits of weight reduction and performance.
Note that this delrin bolt can only be used at velocities under 300 FPS. MANY have try to use the TIPX as a long range, critter control, or less than lethal gun. Anything over 300 FPS will stress the delrin too much and cause the delrin bolt to snap. Also this bolt is intended to work with the stock barrel. The delrin MRT bolt tip will get stuck and break in the barrel if its anything other than stock. This type of issue is not covered under warranty. If you want to shoot over 300 FPS or use a different barrel please use the metal version of the MRT Bolt.
- Aircraft Grade Aluminum/ Delrin Hybrid Construction
-
Soft Anti-Chop Tip O-ring
-
Increases Efficiency
-
Decrease Marker Pressure
-
Manufacturer:
TechT
-
Shipping Weight:
0.14
lbs
Average Rating
5 stars (based on
3 reviews)
Recent Reviews
Rating:
Reviewed By:
Mike B.
Review Date:
3/15/2020
Comments:
I can't say enough good things about this bolt that others haven't already said. Its awesome. Im a believer in TECHT! TECHT FTW!!!!
Rating:
Reviewed By:
Paul N.
Review Date:
5/20/2014
Comments:
One word to describe this upgrade: Essential.
The TPX, being a blow-forward design and generally being fired with one hand, kicks up before the ball leaves the muzzle due to the bolt's inertia. Reducing the bolt mass by as much as the MRT Delrin bolt d...
Read Full Review
Rating:
Reviewed By:
JB
Review Date:
4/11/2012
Comments:
I got this bolt when it first came out and did a side by side comparison against my other stock TPX. By far it is much better than the stock. I got an extra mag worth of shots in comparison to my stock TPX and I don't know how or why but I seemed to me ...
Read Full Review
Read All Reviews
|
|
|
|
|
|
|
|
|
|
|