TechT Paintball

MRT H.E. Delrin Pro Series Phenom Bolt

TechT takes the Phenom bolt to the EXTREME!
Item: TP029  Back Ordered
  Manufacturer: TechT
(14 reviews) Write A Review
Share:
Your Price: $54.99
Item Comments:
Qty to Add:

 

The TECHT MRT(MASS REDUCTION TECHNOLOGY) HE Pro Series Phenom Bolt has been re-engineered to maximize efficiency and consistency more than ever before! We have continued to use the soft-touch face which will significantly decrease ball breakage. Our MRT system minimizes excess weight by removing portions of the bolt which are not utilized. Our spiral cut pattern allows us to lengthen the channels of material to be removed, the result produces a very dynamic looking bolt. The MRT HE Bolt also features a newly redesigned stem which delivers even better efficiency and consistency than it's predecessor. Players that upgrade to the MRT HE Pro Series Phenom Bolt will see significant increases in efficiency and the elimination of ball breakage typically associated with the stock Phenom bolt. The TECHT MRT Pro Series Bolt is made of a combination of aircraft grade aluminum and delrin which result in a super light design. As with all of our products it carries a Full Lifetime Warranty.

 

The TECHT MRT HE Pro Series Phenom Bolt utilizes the stock spring. In our testing we found that changing to a different spring (a lighter spring) caused issues with the cyclone feed loading correctly. We saw increases of 40-45 FPS when changing out the stock bolt for the MRT HE Bolt. Our tremendous increase in efficiency is due to the combination of the soft-touch face, which helps seal the off the barrel when fired, the tremendous change in weight, high flow face, and our new bolt stem design. The sound signature is also greatly reduced when adding the MRT Bolt.

Our New MRT H.E. design utilizes two o-ring glands that act as sails on the interior of the bolt. These o-rings do not actually seal (therefore they will not need to be replaced). They do however maximize the the transfer of air propelling the bolt forward and by doing so allow the MRT HE bolt to get even better efficiency than ever before. The exhaust port on the interior of the stem allows the bolt to cycle freely and quickly.

All MRT Phenom Bolts will come with our Phaze-5 Air Fitting for the Cyclone Feed. The Phaze-5 Fitting allows more air to get to the cyclone feed and actuate the paddles more consistently. The TECHT Phaze-5 Fitting is manufactured from stainless steel which makes it a much more durable replacement for the stock plastic fitting. The Phaze-5 Fitting must be installed to allow the MRT Phenom Bolt to work properly in conjunction with the Cyclone Feed System.

When the TECHT Pro Series Delrin MRT HE Bolt is combined with our Phaze-5 High Flow Air Fitting, players will be able to run at lower operating pressures and higher rates of fire. The Phaze-5 High Flow Air Fitting allows the Cyclone feed to run more consistently with the extremely lightweight design of the TECHT Pro Series MRT HE Bolt.

Thanks to Bad Karma Paintball Team for all of their support of TechT Paintball Products. They trust our company to make the best parts for their markers. By using the TECHT MRT Phenom Bolt System Bad Karma is cutting down the competition. "The TECHT MRT Phenom Bolt is head and shoulders above the rest."-Jared Bronson Team Captain of Bad Karma Paintball Team.



 

Check out the Stock Bolt vs the MRT Bolt!

 

The video below shows how easy it is to install.

 

  • Aircraft Grade Aluminum
  • Soft Anti-Chop Tip O-ring
  • Teflon Coated for wear resistance
  • Increases Efficiency
  • Decrease Marker Pressure
  • USA MADE
  • LIFETIME WARRANTY
  • Manufacturer: TechT
  • Shipping Weight: 0.14 lbs
Average Rating   4.928571 stars (based on 14 reviews)
You must be logged in to write a review
Recent Reviews Rating: Reviewed By: keaton h. Review Date: 5/19/2011 Comments: thought i did a review already ehh guess i didn't but all that can be said this is a must have for any phenom owner....... enough said p.s. thank you so much for the help techt paintball !!!!!! Team K"N"S
Rating: Reviewed By: Rob t. Review Date: 4/24/2011 Comments: When i look to upgrade a marker the first thing i look for are parts from techt. Every thing ive orderd from this guys exceeds expectation and this bolt was no difference. Thumps up.
Rating: Reviewed By: Eric W. Review Date: 3/23/2011 Comments: I installed this on my phenom. Coupled with the phase 5 fitting, my gun fired more consistently, even when I was running low on air. Teammates I was skirmishing against said they could not hear my gun down range. They heard the balls whizzing by and/or...
Read Full Review

Rating: Reviewed By: Douglas G. Review Date: 2/28/2011 Comments: I have not used this bolt during play yet, but have had a chance to shoot it outside in my backyard over a chrono. The increase you get from this bolt is amazing! I had to turn my velocity down 1 full turn! shooting 280 fps consistantly! Also the sound is...
Read Full Review

Rating: Reviewed By: Steven Z. Review Date: 2/2/2011 Comments: First upgrade for my Phenom and this bolt does everything it says it is supposed to (reduced weight, higher fps, more quite, and smoother)!! There was an issue with my phase 5 not seating properly in my gun so I called Techt and without question they imme...
Read Full Review
Read All Reviews
techt, ifit, TECHT, Tech-t